Copper Rod Manufaturer in Delhi, India

Best Copper Rod Manufacturer in Mumbai, India

Request Price Download Brochure

These "OFC" oxygen high free conductivity rods are mainly used for the purpose of cryogenics. At Vipul Copper we ensure that our copper rods are cast under extreme caution so that they are free from dirt and clean by 99.99%. With extreme cleanliness and high mobility these rods are much needed in the industrial sector for its chemical properties in addition to its performance.

We are Best Copper Rod Manufacturer in Mumbai, India. If you are looking for Best Copper Rod Manufacturer in Ahmedabad, India then your search ends here.

Copper Rod are made in a variety of sizes including 8mm, 10mm, and 12mm; 20mm Etc. 8mm our standard size of copper rod. We will also produce copper in different sizes as required by customers.

The copper rod has a higher quality, better softness, good shine and good aging and tear ability.

We provide the top quality Copper Rods. Our all products are highly demand in the market today.

Copper sticks are mainly 3 types round, square, and Hexagon. The minimum amount of copper in the walls is 99.99% according to IS 191 and the existing sizes are 3mm to 100mm which are widely used in transformers, railways, connectors, curves and cables etc. which we offer at the most reasonable price the best quality.

Accurately rounded and rounded copper rods are available in full strength and partial strength.

With its high power output the Vipul Copper Rod ensures the highest efficiency in converting and transmitting power. Whether you are an underground or underground cable operator or as a solid transformer wire, generators and motors: its high quality and cleanliness means that our rod is highly sought after in these complex applications. At the same time, excellent drawing features, uniform recrystallization behavior and the surface structure of our rod, which is very important for wireless fence builders, making it easier for further processing by our customers.

In transmitting signal and electricity, too, the excellent physical and chemical properties of our products are very helpful in helping the continuation of miniaturization and weight loss while maintaining high fidelity.


Standard Sizes

SIZES 8 mm 10 mm 12 mm 12 mm 15 mm 16 mm 20 mm
Diameter (mm) 8 ± 0.38 10 ± 0.38 12 ± 0.50 14 ± 0.50 15 ± 0.50 16 ± 0.50 20 ± 0.50
Ovality (mm) ± 0.38 ±0.38 ± 0.50 ± 0.50 ± 0.50 ± 0.50 ± 0.50
Elec. Conductivity (%IACS) > 100 > 100 > 100 > 100 > 100 > 100 > 100
Elongation (%) > 35 > 35 > 35 > 35 > 35 > 35 > 35
Residual Surface Oxide Film (A o) < 1000 < 1000 < 1000 < 1000 < 1000 < 1000 < 1000
Coil ID/OD (mm) 1100/1750 1100/1750 1100/1750 1100/1750 1100/1750 1100/1750 1100/1750

*Any Intermediate size can be manufactured as per the customer requirement

Production / Quality


Cathodes and Mill Berry Scrap, which have a copper content of more than 99.95 %, are first melted down in a carefully monitored process and then cast continuously as an endless bar.

Still glowing, this bar is then fed into the hot-rolling mill where it is rolled into copper rod. This is followed by surface conservation before the rod is laid into coils weighing up to 5 ton each. Sampling, packing and labelling complete the production process. This efficient, energy-optimized and environmentally friendly continuous casting process is constantly being perfected and used by Vipul Copper.


Every coil manufactured undergoes intensive testing by an independent department. Integrated “in-line” procedures are constantly on the look-out for surface defects and magnetizable inclusions.
At the same time, all the relevant parameters of the production process are monitored, documented and used for the detailed assessment of the products’ quality. Independently of this, two rod samples are taken from each coil, which are then used for destructive testing: properties such as electrical conductivity, surface, quality of the microstructure, tensile strength, chemical composition and recrystallization behavior are determined and compared with fixed target values. Only if the rod meets the defined criteria in every respect is it released for dispatch.